Contractor-Grade Specification: All Quality Diamond Blades products are engineered and tested in accordance with ANSI B7.1 safety standards and OSHA 29 CFR 1926.1153 Table 1 silica guidelines.
Engineering & Operating Parameters
| Parameter / Specification | Certified Engineering Value |
|---|---|
| Segment Height | 12mm - 15mm |
| Bond Hardness | Soft Hard-Matrix with Carbide Drop Segment Undercut Protection |
| Diamond Grit | 20/30 Mesh Coarse Industrial Diamond |
| Segment Type | Laser-Welded Drop Segment |
| Arbor | 1" Standard Arbor with Drive Pin Hole (20mm Adapter) |
| Max RPM | 6,400 RPM for 12" (ANSI B7.1 Certified) |
| Wet/Dry | Dry Rated / Wet Recommended on High-Sand Aggregates |
| Diameters | 7", 12", 14", 16", 18", 20", 24" |
| Applications | Hot-Mix Asphalt, Cold Mix, Green Concrete, Asphalt Over Concrete |
| Undercut Protection | Carbide Deep Drop Segments to Prevent Core Washout |